Bluewall Readymix Plaster in best alternative against traditional On site mixing and Procurement procedure for plastering, Bluewall Readymix plaster is manufactured with well graded sand along with best quality cement and polymer based additives.
Bluewall Readymix Plaster in best alternative against traditional On site mixing and Procurement procedure for plastering, Bluewall Readymix plaster is manufactured with well graded sand along with best quality cement and polymer based additives.
Bluetile Type-2 Tile/Stone adhesive is a high quality adhesive used for the permanent fixing of tiles/Stone over smooth surfaces such as existing tiles, ceramic tiles or glass, subjected to damp and tropical conditions and for specialized applications such as tile on tile and tile-on-glass etc.
Read More1.Polymer modified - pre wetting of tiles not required and hence less prone to cracking of mortar
2.Single component - ease of application
3.Non toxic - User friendly application.
4.Excellent adhesion on smooth surfaces - Develops high adhesive bond strength
5.Non shrink - excellent bond with the substrate
6.Excellent work and open wet time of 2 hrs at 90C - allows the mason to fix tiles at ease even under hot conditions
7.Self cure - does not require external curing
8.Forms a dense and impermeable mortar bed - waterproof
All surfaces must be sound and thoroughly clean before Bluetile Type-2 is applied. All traces of grease or oil must be removed with suitable degreaser. All loose particles of mortar, old wallpaper, paint etc., must be physically removed. In case of cementations surfaces, the areas of application must be thoroughly wetted with water to obtain saturated surface dry condition. In case of smooth surfaces, pre wetting of substrate with water is not essential.
Bluetile Type-2 should be mixed with water in the ratio of 3: 1 by volume or 4:1 by weight. While mixing, add powder to the water to avoid lump formation. A slow speed drill fitted with a suitable mixing paddle is recommended for mixing. Hand Mixing may also be resorted to if small quantities are mixed. (Note: Use of chilled water in extreme temperatures will increase open time of Bluetile Type-2)
Bluetile Type-2 is spread on the substrate to a uniform thickness of 2mm to 12mm(min to max). This is then combed horizontally with a notched trowel. The tiles are then placed firmly into the adhesive bed ensuring good contact with the mortar by a twisting motion.
Bluetile Type-2 is supplied in 20KG Bag. 12 months in unopened bags under normal warehouse conditions must be stored in a cool dry place.
